 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC-DC Converter UNIT TU Series ( 1W UNREGULATED DC-DC CONVERTER ) FEATURES 1000VDC ISOLATION EFFICIENCY UP TO 82% INTERNAL SMD TECHNOLOGY LOW COST NO HEATSINK REQUIRED UP TO 1W UNREGULATED OUTPUT POWER DUAL IN LINE PACKAGE 100% BURNED IN MTBF > 2,000,000 HOURS OUTPUT SPECIFICATIONS Voltage Setpoint Accuracy Temperature Coefficient Ripple & Noise (20MHz BW) Line Regulation1 Load Regulation2 Short Circuit Protection +/-1.2% max +/-8% max Momentary +/-2% max +/-0.03%/ OC 100mVp-p max INPUT SPECIFICATIONS Input Voltage Range Input Filter +/-10% max Capacitor Type GENERAL SPECIFICATIONS Efficiency Isolation Voltage3 70%-82% 1000 VDC min 9 10 ohms min 100 KHz min 80pF max 2,000,000 Hours 2.2g Typ Non-Conductive Plastic 20.3mm*10.2mm*7.1mm ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Cooling -25 OC to +71 OC -55 OC to +125 OC Free-Air Convection Isolation Resistance Switching Frequency Isolation Capacitance MTBF Weight ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 O Case Material Case Size C UNLESS OTHERWISE NOTED. 1 2 3 Line Regulation is for a 1.0% change in input Voltage. Load Regulation is for output load current change from 20% to 100%. For 60 seconds www.Power-Systems.de Page: 1 / 6 Version: 4-Oct-02 DC-DC Converter UNIT TU Series ( 1W UNREGULATED DC-DC CONVERTER ) SELECTION GUIDE 1W OUTPUT MODEL NUMBER INPUT (VDC) 5 5 5 5 5 5 12 12 12 12 12 12 24 24 24 24 24 24 OUTPUT (VDC) 5 12 15 +/-5 +/-12 +/-15 5 12 15 +/-5 +/-12 +/-15 5 12 15 +/-5 +/-12 +/-15 OUTPUT (mA) 200 84 67 +/-100 +/-42 +/-34 200 84 67 +/-100 +/-42 +/-34 200 84 67 +/-100 +/-42 +/-34 INPUT CURRENT(mA) FULL LOAD NO LOAD 26 26 28 26 26 28 11 11 12 11 11 12 8 8 7 8 8 7 73 79 79 73 79 79 74 82 82 74 82 82 73 77 80 73 77 80 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 VOLTAGE VOLTAGE CURRENT EFF (%) ISOLATION (VDC) TUS-0505 TUS-0512 TUS-0515 TUD-0505 TUD-0512 TUD-0515 TUS-1205 TUS-1212 TUS-1215 TUD-1205 TUD-1212 TUD-1215 TUS-2405 TUS-2412 TUS-2415 TUD-2405 TUD-2412 TUD-2415 274 253 253 274 253 253 112 102 102 112 102 102 57 54 52 57 54 52 Note: Other input to output voltages may be available. Please contact factory. www.Power-Systems.de Page: 2 / 6 Version: 4-Oct-02 DC-DC Converter UNIT TU Series ( 1W UNREGULATED DC-DC CONVERTER ) MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PIN 1 7 8 9 11 14 SINGLE -Vin NC -Vout +Vout NC +Vin DUAL -Vin NC COMMON +Vout -Vout +Vin SIMPLIFIED SCHEMATIC SINGLE OUTPUT +Vin OSCILLATOR DRIVER DUAL OUTPUT +Vout +Vin OSCILLATOR DRIVER +Vout COMMON -Vin -Vout -Vin -Vout www.Power-Systems.de Page: 3 / 6 Version: 4-Oct-02 DC-DC Converter UNIT TU Series ( 1W UNREGULATED DC-DC CONVERTER ) TYPICAL APPLICATIONS SINGLE OUTPUT INPUT +Vin +Vout DUAL OUTPUT INPUT +Vin +Vout OUTPUT OUTPUT LOAD1 DC-DC CONVERTER -Vin -Vout LOAD DC-DC CONVERTER -Vin Common LOAD2 -Vout TYPICAL PERFORMANCE CUREVES Specifications typical at TA=25 OC,nominal input voltage , rated output current unless otherwise specified. VOUT VS LOAD(5Vout Models) 6.4 6.0 5.6 5.2 4.8 0 50 100 150 200 VOUT VS LOAD(+/- 5Vout Models) 6.4 6.0 5.6 5.2 4.8 0 +/-25 +/-50 +/-75 +/-100 Vout(V) Output Current(mA) Vout(V) Output Current(mA) VOUT VS LOAD(12Vout Models) 13.5 13.0 VOUT VS LOAD(+/- 12Vout Models) 13.5 13.0 Vout(V) 12.5 12.0 11.5 0 20 40 60 80 Vout(V) 12.5 12.0 11.5 0 +/-10 +/-20 +/-30 +/-40 Output Current(mA) Output Current(mA) www.Power-Systems.de Page: 4 / 6 Version: 4-Oct-02 DC-DC Converter UNIT TU Series ( 1W UNREGULATED DC-DC CONVERTER ) VOUT VS LOAD(15Vout Models) 16.5 16.0 VOUT VS LOAD(+/- 15Vout Models) 16.5 16.0 Vout(V) 15.5 15.0 14.5 0 15 30 45 60 Vout(V) 15.5 15.0 14.5 0 +/-7.5 +/-15 +/-22.5 +/-30 Output Current(mA) Output Current(mA) EFFICIENCY VS LOAD OUTPUT POWER(W) EFFICIENCY(%) 80.0 60.0 40.0 20.0 0.0 0 20 40 60 80 100 1.2 0.9 0.6 0.3 0.0 DERATING CURVE SAFE OPERATING AREA -25 0 25 50 70 100 % OF RATED LOAD(%) TA(degree C) TU SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: Output filtering is required for operation. A minimum of 10uF is needed. Output capacitance may be increased for additional filtering, not to exceed 220uF. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm from DC to 250KHz is required. www.Power-Systems.de Page: 5 / 6 Version: 4-Oct-02 DC-DC Converter UNIT TU Series ( 1W UNREGULATED DC-DC CONVERTER ) Negative Outputs: A negative output voltage may be obtained by connecting the +OUT to circuit ground and connecting -OUT as the negative output. FOR MORE INFORMATION CALL: Power Systems - The Power Solution 74360 Ilsfeld-Auenstein ( Germany ) Dornet 8 E-mail: Info@Power-Systems.de Tel: + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 -80 Home Page: www.Power-Systems.de www.Power-Systems.de Page: 6 / 6 Version: 4-Oct-02 |
Price & Availability of TUD-0505
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |